Maxview Precision ID 65cm Satellite System

Maxview Precision ID 65cm Satellite System

New for the 2016 Season, Maxview have long manufacturered innovative and easy to use equipment for motorhomers and caravanners alike. This new system known as the Maxview Precision ID makes manual satellite alignment even easier again.

Based on the Maxview Precision the "ID" systems have an additional LED to indicate that you have aligned your satellite dish to the satellite that your satellite receiver is set to receive.

Maxview Precision ID Features:

• Integrated Sat Finder ID - In addition to visual LED feedback on signal strength and therefore proximity to satellites, the Sat Finder ID integrates an LED which is only activated when the user locates the desired satellite, overcoming the possibility of incorrect alignment.
• Elevation Control and Elevation Indication - Allows the user to accurately set the antenna elevation within 1 degree of accuracy.
• Satellite Leg and Satellite Azimuth Zone - The 75 degree limited azimuth search zone reduces the margin for error significantly when searching for satellites.
• Unique Flexible Cable - Coupled with push fit connectors and weather resistant boots, the flexible cable minimises assembly and disassembly time.
• Integrated Level Indicator - Indicates whether the tripod is on level ground; a factor influencing the required elevation.
• Quick Release Tripod Clamp - Minimises assembly and disassembly time.
• Folding LNB Arm with Magnetic Lock - The integrated magnet allows the LNB arm to lock into its folded position, aiding transportation and storage.
• Carry Bags.
• 2 Year Guarantee

Included in the box:

• 55, 65 or 75cm Antenna Unit
• 0.2db Single or Twin LNB
• Tripod Stand
• Integrated Sat Finder
• LED Sat ID Module (Integrated)
• Audio Sat ID Module
• 2 x 1m F to F Fly Lead
• 1m Male to Male RCA Audio Cable
• 3.5mm Audio Jack to RCA Audio Adaptor
• 10m Flexible Cable
• Compass
• 2 x Carry Bags
• Ground Pegs
• Elevation Map