Windblocker Sunshade Single Front Panels

When ordering please use the selective drop down menus above to chose your require size and colour, please note that the price you see is the 'from' or start price.

The sunshades themselves are 75cm wide and are paired up to make panels, this is done by simply sliding them into the awning rails.

Windblocker Sunshades can be fitted to most awnings such as Fiamma  awnings which have channelling for camp rooms and safari rooms.

Click to enlarge image of Windblocker Sunshades in action

Windblocker Sunshades come in several different colours and sizes, when ordering please choose the require colour and size based on your awnings width. Using the Windblocker Sunshades you can prevent unwanted insects getting into your motorhome or caravans awning.

How are windblocker sunshades fixed to the awning ?

Windblocker sunshades front panels have a hemmed top edge with a bulbous top section, this bulbous bit feeds inside the small slit that runs along the box section of the front of the awning (See picture below) the bulbous section keeps it fastened securely against downwards tension.

The side and front panels all have equally spaced rubber loops at the bottom which can be used to peg down the bottom edge.

The side panels have a further set of rubber loops at the top which a pole is inserted into and fed through.

The material used to produce the Windblocker Sunshades has been used in the past to protect bulbs and flower fields, this allows light in but keeps draughts out. Can be simply erected in minutes using the elasticised tie downs and pegs. The Windblocker Sunshades are extremely lightweight and easy to fit - they can be simply rolled or folded down into a small space.

You've most likely seen these on display at shows, last year at the NEC October '09 these were being demonstrated with a hurricane fan and candles - the candles were set behind the sunshades and the hurricane fan didn't affect them in the slightest.

If your using a Fiamma Awning you may want to consider using the Fiamma Awning Tie Down Kit.
 

Windblocker Sunshades Front Panel Specifications:

Front Panels:

• Standard Height 200cm (78").
• Width per sunshade 75cm (29") - (product will include several of these to produce a larger camp room).

Available colours:

• White.
• Grey.
• Blue.
• Green.
• Charcoal.
• Burgundy.

Cerise and mulberry to order only (please contact us regarding these colours).

Windblocker Sunshades Front Panel Sizes:

Choosing your Windblocker Sunshade size:

A - Width of your motorhomes/caravans awning.
B - 2.00m or 78".
C - 2.20m or 88".
D - 2.49m or 98".