Waeco RV790 Twin Lens Reversing Camera
Read the Waeco RV790 Reversing Camera Tech Spec

Ever wanted to have a reversing camera with the best of both worlds, i.e. a view of the road behind your motorhome allowing you to see vehicles approaching from behind and a reversing camera system where you could see any objects close behind you when reversing ?
Your wishes have been answered with the new Waeco RV790 twin lens reversing camera system.
The RV790 reversing camera kit comprises of a 7" screen and a twin lens reversing camera with built in heater and microphone.
 
One System but with two roles ! Waeco’s new RV33TCFM twin camera combines a close in camera activated when you put your motorhome into reverse which monitors close in, and a Distant view activated automatically when you are in a fwd gear.
the long-distance camera (40°) provides a distance viewing e.g. when travelling in line or pulling a trailer. It is also useful in combination with the outside mirror when overtaking.

The close vision camera (140°) provides an accurate view of everything happening immediately behind your vehicle – which means maximum safety e.g. when manoeuvring. RV33TCFM

Benefits compared to swivel-lens cameras include: Waeco’s twin camera does without fault-prone electric motors and mechanical parts. There’s no need for a control panel either. Moreover, both special Waeco objectives provide an optimal picture for the respective application.
When moving forward the monitor (e.g. Waeco RV511S or RV70) shows the long distance view towards the rear; when reversing the system changes over to close-vision mode within fractions of a second. Thus it’s easy to keep a perfect overview in any traffic situation.
Reversing Camera System Monitor Dimensions (WxHxD) 175 x 135 x 100 Operating voltage 12/24v DC Power input 10 watts Diagonal screen 7” / 178mm (visible picture) Resolution 337,000 pixels Picture brightness 300cd/m2 Operating temperature -10ºC to +60ºC Humidity 10 – 95% Vibration resistance 4g
Cameras Dimensions (WxHxD) 124 x 78 x 109mm (inc protective cap and mount) Current input 0.1amps Picture sensor 1/3” CCD sensor Lens 140º/40º aperture angle, diagonal Resolution 270,000 pixels Light sensitivity <1lux / 0 Lux with LED Operating temperature -20ºC to +65ºC Vibration resistance 6g Horizontal picture angle approx 100º Vertical picture angle approx 75º Type of protection Equivalent to IP67
|