Sterling 12v 210A Alternator to Battery Charger - AB12210

 Download Sterling Alternator to Battery Charger Instruction Document

The Sterling Alternator to Battery Chargers are designed to be installed in motorhome or marine charging systems where it is not possible or undesirable to dismantle the alternator or modifying the engine wiring harness.

The sterling alternator to battery charger applies a load on to the alternator which pulls down the alternator voltage.

Due to the increased load, the alternator has to work harder to compensate for the artificially high drain on the system.

However, the alternator output voltage is pulled down to an insufficient voltage for charging batteries. So the Sterling alternator to battery charger converts the high current, but low voltage, output and "amplifies" the voltage to charge the auxiliary battery bank at a higher voltage than the alternator output voltage.

In order to achieve fast and efficient battery charging, the software control program and settings for this product are the same as for the Sterling Digital battery chargers and the Digital advanced alternator regulator.

System selection. Ensure the rating of the charging system is higher than the output rating of the alternator.

Sterling Alternator to Battery charger summary:

Quick and simple installation
Increased alternator efficiency
Batteries charge upto 5 times faster
Advanced charging profile increases battery capacity and improves battery life
No Engine or Alternator warranty issues
Built in 2 bank split charge diode
Auxilary/Domestic batteries can be Lead acid, AGM or Gel
Alternator Temperature Sensor
Optional Remote Control with current monitoring shunts