Bregenz Motorhome awning

Bregenz awning for Campervans: 

The Bregenz Awning was reviewed by MMM In May 2007

 Read the MMM Review of the Bregenz Awning Page 1 (3.09Mb)
 Read the MMM Review of the Bregenz Awning Page 2 (3.22Mb)

A top quality drive away Motorhome awning (annexe) for camper vans with side opening door.

Designed and manufactured by DWT-Zelte Germany.

The Bregenz Motorhome Awning is very adaptable and excellent quality.

Panels can be rolled up or lifted for versatility while design details like built-in high vent and rainwater gutter are included.

The Bregenz awning assumes that the vehicle it is to be fitted to has either a gutter or a 'J' rail fitted.

The breathable fabrics are coated polyester for the roof and impregnated polyester cotton for the walls.

The use of steel and aluminium, galvanised and gold passivated components where appropriate ensures that the Bregenz motorhome awning has both strength and durability.

Comes complete with vehicle anti-draught skirt, curtains, anchors and packsack.

Approx size 340 x 200 cm.
Height approx 175-210 cm.

Awning rail not included.

included accessory bars hold up the l/h panel as an extra area of shade to extend your living area still further.

Download and Read the Instruction Guide (500Kb)

Full Specifications:-
Roof Material: PVC Coated polyster Fabric
Sides / front / rear material: Polyster / Cotton with PVC Film or windows
Measurements: Approx 340 x 200 cm.
Extension Roof: Approx 20cm.
Front Spec: Door on the RH Side, opening roll up front with curtains.
Specification LH Side: Roll up side or use as a canopy
Specification RH Side: With ventilation window, covered.
Specification Rear: Tunnel height minimum 1.75M maximum 2.1M
Weight: 20Kg

Dimensions packed away:
approx. 115cm x 35cm x 23cm

Full review by MMM May 2007